data table

Veselina

Hello, I am using ImagePro Primer 9.2. the data table is activated but non of the buttons are not active. I received an error "object reference not set to an ensure of an object". I restarted the computer and reinstall Image-Pro primer but nothing changed.
What would be the solution?
Thank you, 
Veselina

YuriG

Hi Veselina,

The buttons in data table are only activated if you have counted objects on the active image. Please execute Count (on Count/Size tab) and check the data table.
If you still have the problem, please post the screenshot on the forum.

Thanks,

Yuri

Veselina

Yuri, Please see attached image. For that one I used the manual tag but is the same with the Count/Size.
Thanks,
Veselina

YuriG

Hi Veselina,

The screenshot shows Traking data table, please use Measurements data table (activated on Count/Size tab) to check the measurements.

Yuri

Veselina

Juri, 
this is what I had when tried to use count/size tab.
Thank you
Veselina 

YuriG

Hi Veselina,

It looks like the Measurements data table is on another screen or outside the screen boundaries. You should reset the tools layout (View tab, Tools drop-down, Reset Tools Layout button) and then show the table. The Measurements table should appear at the bottom of the image.

Yuri

Veselina

the problem solved. Thanks