Image-Pro Plus General Discussions — Media Cybernetics Image Analysis Forums

How to add Sphericity screening in smart segmentation?

Louis — Sat, 30 Mar 2024 06:30:02 +0000

Hi Yuri,

How are you? It's been long time since my last question : ) I hope everything is going well.

Recently i was trying to separate some round object from smart segmentation. Is there any way to do it in IPP? Firstly, i segmented it with smart segmentation, then how to further choose those round objects by roundness factor?

one more question: is there any way to learn objects/backgrounds in different pictures when using smart segmentation?

Thank you very much for your always warm help.

Best,
Louis

Image Pro Plus crashes when trying to load tags

ryfmann — Wed, 05 Apr 2017 16:07:51 +0000

A student of mine counted muscle fibers from histology slides using Image Pro Plus. The image opens just fine, but when I try to upload the saved tags, Image Pro crashes. This happens on 18 of the 20 images he counted. Could it be that too many tags were added?

Excel Exported file issue

raihanul — Sat, 15 Apr 2023 21:26:05 +0000

Hello everyone,
i had one issue regarding excel file export. I exported my data from data collector. Excel file is mot visible after export. There is an open excel file on the windows tabs but it is not visible when clicked. When I try to close excel tab it says do you want to save exported data. If I save it in any folder I can then access the data file. I believe its not an issue of excel because separately I can use the software. Can anyone help me with this?

How to set the zoom in Capture

StanleyH — Wed, 18 Jan 2023 01:19:38 +0000

Hi Specialist:
I meet an issue about the window size to live preview and snap. The live preview seems to be set as 50% zoom, but the snap window is 100%. Have you idea how to set the snap window as 50% as well. Please give some advice, thank you.

Processing of Bubble-Particle Aggregate Images

syamsundar_menon — Thu, 04 Aug 2022 23:51:44 +0000

Hi Everyone,

I have a question regarding the processing of a series of images through Image Pro. As I am new to the software, I am not too familiar with all the functions available.

From the attached file, you would be able to see that it is a series of consecutive images, where a bubble is rising through the tank with particles attached to the bottom of it throughout this process.

As the bubble is partially covered by particles, what I would like to do is isolate the surface of the bubble from the particles, and measure its exact dimensions such as its major axis, minor axis, equivalent diameter, centre of the bubble, etc.

A step-by-step process on how to go about this would be greatly appreciated!

Particle Counting -- Counting Too Many/Counting Undesired Objects

katherinemcg — Wed, 09 Feb 2022 15:33:37 +0000

Hello,

I have been using Image Pro Plus to count DAB stained positive cells. I am using the thresholding tool to isolate the desired cells. However, the software is picking up spots that are not the cells I want, as well as counting one cell as several signals. For example: in one crypt the software is recognizing 200 positive cells (when by eye I count 11). Is there a way I can fix this?

HASP Driver not found

basil — Thu, 20 Jan 2022 21:22:33 +0000

Hello All,

We are trying to install Image Pro Plus ver 7. We initially installed the application on a Windows 7 Enterprise Computer. It is updated to version 7.0.1. However, we cant get the Sentinel token to be detected when we start the application. We just get a pop-up "Cannot Open HASP Driver"
I have installed the "Sentinel® LDK and Sentinel HASP® Run-time Environment Installer GUI for Windows" from a different post.
Device Manager does see the device.

Any help would be appreciated

Is there a way to make the “tick” marks wider when using the line profile tool?

user2746472 — Tue, 31 Aug 2021 21:02:19 +0000

Hello!

I was wondering if there’s a way to make the “tick” marks wider when using the line profile tool. When I try to take a snap they are nearly invisible. They are also difficult to see when I’m just using the program.

Hasp Driver not found IPP 7.0

ahdow — Thu, 27 May 2021 14:50:27 +0000

Hello, I have reinstalled a windows 7 machine and I am trying to get past the Cannot find HASP driver error. I have tried downloading and installing the Sentinel Protection Installer 7.7, The Sentinel LDK Runtime 8.2. I also tried the cleanup utility and installed the 8.15 Sentinel LDK runtime. I took the machine offline and disabled antivirus after finding that I had a piece of software that was inducing the DEBBUGER FOUND error.

How to save a segmentation image mask after object filtration

Danielro — Tue, 17 Nov 2020 21:01:53 +0000

Hello to everybody!

I would like to know how to export images with measurement masks layout on top.

Basically, I am segmenting my images based on the RGB pick tool and I am defining 2 classes of objects (nuclei and immunohistochemistry signal). Then I do some area measurements, and I am also filtering my objects based on area, so that I do not count areas smaller than 2 sq microns.

And I would like to export an image with the colored masks on top, after area filtration.

The only way I could find was to press “Create preview image” in the “Count and measure objects menu” after the actual segmentation. However, even though I come back to this menu after measuring the data and applying the filter, this preview image contains the un-filtered mask… Is it possible to obtain a mask of the full image (not a print screen) after applying the filter?

Thanks so much and all the best wishes from Romania!

Take care and stay healthy, you and your beloved ones!!!

Daniel

measurement of area

stopherlogic — Fri, 25 Sep 2020 12:02:13 +0000

Hi, you will have to forgive me I am a complete newcomer to this software. I am using image pro v10 (not plus or premier) and need to measure a drawn area in micrometers. I have figured out how to calibrate to micrometers and need the area in micrometers that I have manually drawn out using the polygon tool.

How can I reduce [managed memory usage] ?

Kyle1996 — Mon, 14 Sep 2020 02:21:58 +0000

Hi guys,

We developed a macro for image batch analysis on IP-10 version 10.0.7.

The content of the macro is roughly [Open Image],[Apply Calibration] ,[Use 2D Filter], [Count], [Mask New Image], etc.

The images are all set to [visible=false], and after each image is counted, it will be closed.
Follow : https://forums.mediacy.com/discussion/709/batch-processing-limitations

At the beginning, it takes about 2 seconds to analyze an image, and after a while, it takes about 10 seconds for an image, and the [managed memory usage] cannot be reduced.

After testing, I found that the memory accumulate in [Apply Calibration], [Duplicate], [CreakMask], etc.
So I wrote a simple macro test.

[Apply Calibration]:

[Duplicate]:

After processing 14 images:

What should I add to the macro to reduce the usage rate of [managed memory usage]?

Attached is the simple test macro.

Thanks!

manual measurement tool window disappeared

mglasgow — Tue, 01 Sep 2020 21:16:24 +0000

I'm looking for trouble shooting help with Image Pro Plus 7.0 running on windows 10.

The other day i was using the "Manual Measurement tool window" I closed the window and have not been able to get it to open back up. I have restarted my machine and reinstalled the program, the tool is still not opening. I've opened and closed this window tool hundreds of times before with no issue.

IPP on Win 10 - 1709 only starts once

helga_mayr — Thu, 01 Mar 2018 10:40:28 +0000

Until now we ran IPP 7.0 on a Windows 7 computer and now changed to Windows 10 1709. On the latest Windows 10 computer that we purchased, IPP starts only, if the first thing the user does after booting the system is to click the application icon i.e. to open IPP. Anything else prevents IPP from starting. There is only the hourglass displayed for 2-3 seconds. That is all. The other computers that are not configuered differently but were set up as Win 10 1607 and upgraded to 1709 with updates, with this IPP is running perfectly.

Error Code 0x0000005

Any help appreciated. Anyone who has had similar problems, please advice!

What is the difference between the roundness measurement and the circularity measurement?

calicchiat — Wed, 03 Jun 2020 17:33:51 +0000

What is the difference between the roundness measurement and the circularity measurement?

Is it possible to run different measurement algorithms on different ROIs in the same image?

rtaliano — Wed, 08 Apr 2020 15:11:50 +0000

I would like to run different algorithms on different ROI's in the same image. Is this possible?

Thanks
Ross T

Bar code reading with Image Pro 7

AviZuki — Tue, 03 Mar 2020 12:57:39 +0000

Can we read bar code nimber with Image Pro 7?

Getting IPP 7 system running

kmmoquin — Fri, 31 Jan 2020 17:33:48 +0000

Hello,

I came here a little while ago with some issues regarding discrepancies between an old and new system that I was hoping to rectify. I have since taken some of the advice, but have more questions than answers. In short, I have both manually and automatically calibrated the XY and Z positions in attempt to fix problems accessing certain functions to no avail. The issues I'm currently stuck with are the following (all having to do with the "stage pro" section under the acquire tab):

-the focus travel speed (lens/mag tab) is greyed out despite z being calibrated
-the site/plane sections (stage tab) are greyed out
-I cannot edit the current area (scan area tab) for frames in Y more than 1 (needs to be 28 for my system)
-I am still having trouble loading a previous scan area/pattern (scan area tab) into the new system
-I am hoping to load my previous system's sample pattern (sample pattern tab) into the new system but cannot figure out how; load list does not do anything when I try that.
-delta z, slice size, z top/bottom (acquire tab) are all zero but should not be based on the number I have set for planes per frame
-the "use user defined pos" box is greyed out (acquire tab)

If anyone is able to help, I would really appreciate it; we are hoping to have this system running but keep finding these small issues and need a fix!

Best,

Kayla

Help with discrepancy in settings between two systems

kmmoquin — Thu, 09 Jan 2020 18:23:47 +0000

Hello!

I currently have a setup using IPP 7.0 that has been up and running for years and is well established. Recently, I have been trying to essentially replicate this setup to double productivity and output. Due to this, while IP 10 would be better/newer, I am sticking with IPP 7.0 for consistency. There were multiple issues (both due to the stage itself and the software) in the beginning, but most of those have been worked out. The main issue currently is that I was not the user who originally set up the existing (old) setup. Therefore, I am unsure how to proceed after a few last-minute hang ups. The main issue is that in Stage-Pro, the focus travel speed is greyed out. This is an ongoing issue and I have attempted to reconfigure focus in Scope-Pro configuration a few times now to no avail. Additionally, I am having some smaller issues with the scan area and sample pattern. I have attached comparison images with brief descriptions of the issue on this post (the top image in each set is the new setup and the bottom image is the current system that is in place). Any and all help/advice is appreciated! Thank you!

Arturo Fuente Cigars

cuencacuenca — Tue, 24 Sep 2019 07:18:40 +0000

Arturo Fuente cigars for sale, one of the most popular names in the cigar world, has earned accolades from all over the place.

How can i create an ios app of my website

mikeadams556 — Wed, 04 Sep 2019 21:08:23 +0000

hello i am facing some trouble in developing the web view ios app of my website.

Image pro plus 6.2 appcrash on widows 10 1809

uns1t — Tue, 23 Jul 2019 17:01:16 +0000

Image pro plus is not working correctly since 1809. Sometimes it runs and somtimes it doesn't even open and throw a appcrash on the applications events. Generally restarting the computer will make it run again but unfortunately its not a acceptable solution for us. I am not excepting any help since this version of image pro may not be supported for windows 10. But if you guys can still help us it would be really nice .

I left the logs for the appcrash.

Automatically measure distance between two moving object for a video

234abrar — Wed, 26 Jun 2019 17:23:18 +0000

Dear Altruists,

I have a video where two objects are moving. I want to measure the distance between two object automatically as in my real video is too large where measuring the distance frame by frame manually is way too time consuming.
I am not an expert in image pro coding. I will be grateful if you can give me some instruction on how can i do that in image pro.
I have attached an sample image which will tell you actually what I want.

Thanks
Ahmed

Chicago Cubs Shirts with different style and pattern online!

tonyrogers — Fri, 15 Feb 2019 06:44:41 +0000

Chicago Cubs fans come from all walks of life and in all shapes and sizes, so we have an expansive Chicago Cubs shirts collection to match this diversity. From our home base at Wrigley field, we also bring you the best selection of long and short sleeve Chicago Cubs Shirts

How to draw parallel lines to measure distances?

davina — Thu, 13 Jun 2019 12:46:05 +0000

Hello, I am trying to draw parallel lines to measure the ratio of vessel wall:lumen, is there a way to draw parallel lines to measure the two lines? I know there's a perpendicular line tool but was just wondering of any other methods.

Thank you,

Section clear remaining part blurred

mohan — Thu, 03 Jan 2019 03:03:36 +0000

I am trying to take a picture of circular intestinal organoid. If I focus on periphery, the center part gets blurred and vice-versa. Is there any way to get whole section focussed. Thank you.

Batch processing - Limitations

TorbenMandrup — Fri, 18 Nov 2016 08:09:59 +0000

I have managed to create a macro that makes a few counts, AND operation, count again, serving results in Excel, closing images, bla bla bla. Everything works fine so far. I can even make this work in a batch processing, but now comes the problems.I want to batch process a lot of images (>500) and it seems like the opening/closing of images makes Image-Pro choke. I get a message of exceeded number of GID (???) 9800 and the batch wont go any further.

Have I reach a limit or can I somehow clean up cash as we go along?

- Torben Mandrup

DOWNLOAD IMAGE-PRO EXPRESS 4.5.1.3

thiago — Thu, 27 Apr 2017 14:11:42 +0000

HI GUYS GOOD MORNING
I NEED THE INSTALLER OF IMAGE-PRO EXPRESS 4.5.3.

How to get FILTERS from Process menu?

MUHAMMED — Mon, 24 Sep 2018 11:01:06 +0000

Fractal dimension

JuanRodriguez — Thu, 06 Mar 2014 14:41:17 +0000

Fractal Dimension: Reports the fractal dimension of the object’s outline.

this is the definition Image Analysis Pro gives in the index, but I'm interested to know in details how it works (how can I reproduce what the software do?)