data table

Veselina
Veselina
in Image-Pro General Discussions
Hello, I am using ImagePro Primer 9.2. the data table is activated but non of the buttons are not active. I received an error "object reference not set to an ensure of an object". I restarted the computer and reinstall Image-Pro primer but nothing changed.
What would be the solution?
Thank you, 
Veselina

Answers

  • YuriG
    YuriG
    Hi Veselina,

    The buttons in data table are only activated if you have counted objects on the active image. Please execute Count (on Count/Size tab) and check the data table.
    If you still have the problem, please post the screenshot on the forum.

    Thanks,

    Yuri
  • Veselina
    Veselina
    Yuri, Please see attached image. For that one I used the manual tag but is the same with the Count/Size.
    Thanks,
    Veselina
  • YuriG
    YuriG
    Hi Veselina,

    The screenshot shows Traking data table, please use Measurements data table (activated on Count/Size tab) to check the measurements.

    Yuri
  • Veselina
    Veselina
    Juri, 
    this is what I had when tried to use count/size tab.
    Thank you
    Veselina 
    345.png 761.5K
  • YuriG
    YuriG
    Hi Veselina,

    It looks like the Measurements data table is on another screen or outside the screen boundaries. You should reset the tools layout (View tab, Tools drop-down, Reset Tools Layout button) and then show the table. The Measurements table should appear at the bottom of the image.

    Yuri

  • Veselina
    Veselina
    the problem solved. Thanks

Categories